Resin Driveways Services

Block Paving Removal & Resin Replacement

Cracked or sunken block paving cannot simply be overlaid, the blocks are lifted, the sub-base inspected for movement and drainage failure, and any repairs completed before the resin bound aggregate surface is installed. Edge restraints and drainage falls are set as part of the new build-up.

Custom Resin Paving Design

Custom resin paving starts with a base condition check and drainage assessment, not a colour chart. Once the sub-base and edge restraints are specified, aggregate and resin binder are selected to suit the area, driveway, path, or patio, and the finished design is laid as a single trowelled surface.

Driveway Resurfacing

Where a concrete or tarmac base is structurally intact, a resin bound overlay avoids full excavation and delivers a permeable, low-maintenance finish. A specialist checks levels, drainage, and surface condition first, patch repairs are completed before the overlay goes down.

New Build Driveway Installation

New build frontages are often left unfinished, with no sub-base in place. A specialist checks the plot width, confirms permitted development drainage rules for impermeable surfaces over five square metres, and specifies the correct sub-base depth and edging before the resin bound surface is laid.

Permeable Paving Installation

Permeable paving manages surface water on site, meeting the UK householder rules that apply to front garden hardstanding over five square metres. Installation covers excavation, geotextile membrane, permeable sub-base compaction, surface layer, and jointing grit as separate stages.

Resin Bound Driveway Installation

Installation starts with a base assessment, not a trowel. A specialist confirms whether the existing surface can take an overlay or needs excavation to MOT Type 1 sub-base. Resin and aggregate are then mixed and trowelled on site, with edge restraints and drainage falls set before laying begins.

Resin Bound Paths & Walkways

Resin bound aggregate is trowelled over a prepared sub-base to produce a permeable, textured surface suitable for foot traffic. The finish resists moss and algae, drains through rather than pooling, and can be laid in narrow passages where larger machinery cannot reach.

Resin Bound Patios

A resin bound patio bonds natural aggregate into a clear resin binder, producing a permeable surface that drains through rather than pooling. Sub-base condition is assessed first, and edging is installed to contain the mix and maintain a clean finish at garden borders.

Resin Bound Steps & Staircases

Resin bound surfacing is applied across step treads, risers, and edges to produce a textured, anti-slip finish. The aggregate in the resin binder provides grip when wet. Substrate condition, cracks, damp, and level, is checked before any material is applied to confirm the base will hold.

Resin Driveway Repair & Restoration

Repair starts with identifying whether damage is surface-level or sub-base related, the two require different responses. Loose aggregate, narrow cracks, and worn patches are cleaned, primed, and filled with matched resin and stone. Sub-base movement requires deeper investigation before any patch is applied.

Resin Driveways in Peterborough

A resin bound driveway mixes aggregate into UV-stable polyurethane resin, producing a permeable, SuDS-compliant finish. We arrange a local specialist to assess your base condition first, then quote excavation, sub-base, drainage, and resin finish as separate line items.

Resin Overlay on Existing Surfaces

An overlay is only viable on a surface that is structurally stable and free of active moisture or deep cracking. Assessment covers crack width, surface contamination, and base stability. Preparation includes crack repair, cleaning, and primer application to ensure the resin bound mix bonds correctly.

Tarmac to Resin Driveway Conversion

A structurally sound tarmac base is a genuine foundation for a resin bound overlay, not a shortcut. A specialist checks for cracking, drainage failure, and sub-base movement before any resin is mixed. Surface preparation includes crack repair and cleaning to ensure the overlay bonds correctly.