Skip to content

New Build Plots

New Build Driveway Installation in Peterborough

Get the width, drainage compliance, and sub-base right before the resin goes down.

  • Sub-Base Assessed First
  • Itemised Quote
  • Permeable Surface
A modern brick house with grey windows and wooden cladding, a resin-bound driveway, and a meticulously landscaped front garden.

Common Pitfalls

Where new build driveways go wrong, and how to avoid it

The surface is only as good as the decisions made before it is laid.

Skipped Width Check

A driveway laid without a width survey can leave too little room to open car doors or step clear of the car.

Layout Survey First

A specialist measures the plot boundary and confirms the usable width before any excavation is quoted.

Wrong Drainage Spec

Impermeable surfaces over five square metres without proper drainage planning can trigger a planning application requirement.

Permeable Resin Bound

Resin bound aggregate is permeable, and drainage channel positions are confirmed at survey stage to meet SuDS requirements.

Uncompacted Sub-Base

New build plots often have disturbed or unfinished ground that will cause surface movement if a sub-base is not properly compacted.

MOT Type 1 Compaction

The correct MOT Type 1 sub-base depth is specified and compacted before edging restraints or the resin layer are installed.

No Edge Restraints

Without edging restraints, the resin bound layer can spread at the margins, leading to crumbling edges within the first year.

Edging Set at Survey

Edge restraint type and position are specified at the survey stage and installed before the resin bound aggregate is laid.

Scope of Work

What a new build resin driveway installation covers

Each element is assessed and quoted separately so you know exactly what is included.

Single-Car Width Layout

Minimum 2.7 m width confirmed at survey stage.

Double-Car Width Layout

4.8 m or wider, checked against plot boundary.

SuDS-Compliant Drainage

Permeable surface with channel drainage where needed.

Porous Aggregate Selection

Natural or marble aggregate options for the resin layer.

New Plot, Right Foundation

Planning a new build driveway, what to check before the resin goes down

Getting the layout, drainage compliance, and sub-base right at the start avoids costly corrections once the surface is laid.

Request a Survey

New build developments across Peterborough frequently leave frontages unfinished. Before a resin bound surface is specified, three things need confirming: the driveway width and layout relative to the plot boundary, the drainage approach for surface water runoff, and whether the ground has been prepared to a standard that will support a compacted sub-base. Starting without these checks leads to drainage failures or surface movement later.

Peterborough City Council permitted development rules apply to impermeable front garden surfacing over five square metres. A resin bound surface is permeable, so it typically avoids the need for a planning application, but the base build-up still needs to be specified correctly. Drainage channel positions, edging restraints, and sub-base compaction are all confirmed at the survey stage before any work is priced.

The installation sequence on a new plot runs from excavation and sub-base compaction through to edge restraint installation, drainage channel setting, and finally the resin bound aggregate layer. Each stage is quoted as a separate line item. We connect homeowners with a local specialist who assesses the plot and advises on the correct specification before any work begins.

Why Choose Us

Why Peterborough Resin Bound for new build driveway installation?

Accountability and process built around new plot conditions, not a generic driveway job.

Sub-Base Assessed Before Any Quote

A local specialist visits the plot to assess ground conditions before a price is agreed.

Itemised Quote, No Bundled Numbers

Excavation, sub-base, drainage, and resin finish are each quoted as a separate line item.

Drainage Compliance Checked at Survey

Permitted development drainage rules are reviewed at the survey stage, not after laying begins.

Local Specialists for Peterborough Plots

We connect you with specialists familiar with new build estate conditions across Peterborough.

No Work Agreed Until Spec Is Confirmed

Width, edging, and drainage channel positions are all confirmed in writing before installation starts.

A completed resin driveways job at a house
A finished resin driveways project

The Process

From first enquiry to finished driveway

Request a Survey

  1. 01

    Describe Your Plot

    Tell us the plot size, current ground condition, and how many cars the driveway needs to accommodate.

  2. 02

    Survey & Specification

    A local specialist visits, checks width and drainage, and produces an itemised quote covering every stage.

  3. 03

    Installation & Handover

    Excavation, sub-base, drainage channel, edging, and resin bound finish are completed in the agreed sequence.

Pricing Estimates

Typical New Build Driveway Installation Prices

JobTypical cost
Small new build driveway£6,000-£8,000
Medium new build driveway£7,500-£10,500
Large new build driveway£10,500-£16,000
Permeable paving installation£5,500-£15,000
These prices are estimates and often vary with the condition, size and scope of each job. Message or call us for a free, no-obligation quote.
See all prices

Common Questions

Questions about new build driveway installation in Peterborough

  • Do I need planning permission for a new driveway at my house?

    Usually not, provided the surface is permeable and water drains to a lawn or border rather than the road. Impermeable surfaces over 5 square metres on the front garden do require permitted development consent. A resin bound surface is classed as permeable, so it typically falls outside that requirement.

  • Will a resin driveway help with drainage?

    Yes. Resin bound surfacing is porous, so rainwater drains through the surface rather than running off across the pavement or road. This reduces puddle formation and helps meet the permeable surfacing rules that apply to front driveways. Learn more about permeable options.

  • Can you make my driveway wider without getting into trouble with the rules?

    Yes, as long as the extended area uses a permeable surface and drainage is managed on your own land. Widening with a resin bound finish keeps you within permitted development rules for front driveways. A site assessment confirms whether your existing kerb drop and boundary allow the extra width.

  • How many cars can the new driveway realistically fit?

    A standard single driveway of around 3 metres wide fits one car; 5.5 metres or more comfortably fits two side by side. The layout is planned during the site assessment, taking into account your plot width, turning space, and any dropped kerb restrictions.

  • Will the driveway layout work for the number of cars I need to park?

    That is confirmed at the assessment stage, before any work is quoted. The local specialist checks available width, turning radius, and access points to make sure the finished layout suits the number of vehicles you need to accommodate.

  • What should be checked before the driveway is laid?

    The sub-base condition, drainage falls, boundary edges, and any underground services all need checking first. We arrange a local resin specialist to assess the base and advise whether an overlay will hold or the surface needs taking up before a quote is provided.

  • Do you prepare the base and edges properly, or is it just the top layer?

    The full installation is covered, not just the surface. Excavation, sub-base preparation, drainage, and edging are quoted as separate line items alongside the resin bound finish, so every layer is accounted for before work starts.

  • What is included in the quote for the whole driveway area?

    The quote lists excavation, sub-base, drainage, and resin bound finish as separate lines rather than one combined figure. That way you can see exactly what each element costs and compare accurately if you receive other quotes.

More questions about New Build Driveway Installation?

Tell Us About Your Driveway

Describe the area, the existing surface, and how it drains. We will arrange a local resin specialist to assess the base and quote every element separately.

Request a Survey